P2H3 Haring Guide
Everything you need to know to “set a trail” for the Phnom Penh Hash.
Introduction
So, you have been selected by the Hash Hare Raiser to set the Phnom Penh Hash and you are looking for a few suggestions?
- Look no further; here they are. All spelled out the by the
P2H3 Committee.
- To be asked to set the P2H3 trail is an honor and a
privilege.
- The Hash Mismanagement Committee expects regular
hashers take their turn and set a trail about 2 times per year,
and that the experienced pair up with virgin hares to help
them to get started.
Advantages of Being a Hare
- You get a free run
- You earn the undying gratitude of your fellow hashers and
your name will live on in the P2H3 statistics!
- You get to observe the countryside at a more leisurely
pace than when you are running.
- As a dedicated contributor to the P2H3, your chances of
receiving a Hash Name increase.
Please note: your costs (for example transport and paint) of
being a hare can be reimbursed by Hash Cash up to USD30.
Please keep your receipts and chat with Hash Cash on the
day of your trail.
Duties of the Hare - Preparations for your trail
- To find a replacement in event you cannot do it that week, and to inform the Hare-Raiser NO LATER THAN the previous weekend, no
there is no misunderstanding and “No Shows”.
- To set the trail.
- Make sure you have a Co-Hare – it is not advisable to set the trail.
on your own.
- To provide information about the location of the run to the Hare Raiser by 5pm Tuesday before the run – the Hare Raiser will organize
to post the information in all our communication channels.
- After setting the trail, please also send updated information about the run, such as any location changes or extra details to help drivers
get to the start point.
- If possible, take photos of the trail setting that can be used in the
pre run post – it helps to encourage people to join your trail. Please send the photos to the Hare Raiser.
- To appear at Villa Grange at 1.15pm Sunday or published meeting point.
- To either ride in the Hash Vehicle or somehow guide it to the start
point.
Duties of the Hare - At the Start Point
- To explain the rules to the pack, especially to clarify things to virgin
runners.
- To explain if the run us A to A (returning to start location) or A to B (a
different end point).
- Identify the running and walking hares to the pack.
- Tell approximate length of the walk and run.
- To explain about any particular hazards, or attractions, depending on
personal tastes (eg. barbed wire, crazed cattle, lakes of pig manure, shoot-
em-ups at karaoke bars, village idiots, toothless virgins and the like).
- To explain any variations on the usual markings.
- To explain to the driver of the Hash Vehicle how to get to the beer-stop (at
the half-way point) – if you decide to include a beer stop (it isn’t mandatory).
- To start the runners on their trail and to start the walkers on their trail.
- To put the pack back on the trail if they get totally lost.
- To make sure that everyone returns at the end (check the hash statistics).
- To select the site for the On-On-On, and explain this to the pack during
the circle at the end (also not mandatory).
How to find a trail area
- Have a think about previous trails that you liked and talk to those
hares about the location. Getting intel on an area from experienced
hares is a great way to learn about an area that you may not have run
in.
- Best option is to look at google maps or google earth using the
satellite imagery.
- Look for areas that don’t have too much water. Some water will dry
up in the dry season, but some areas are permanent.
- To keep the bus ride to approximately one hour we try to find a start
point about 30 to 40km from Villa Grange.
- Looking for pagodas is a good way to find a start point, usually it is
approximately 2 or 3km between pagodas so choosing 3 and running
between them can give you a rough idea of the distance.
- If you have the time and can go to the area and check it out before
setting the trail it can give you a better result and make it easier to
plan the trail – but this is not required and is not always possible.
- Mapping the trail using a tool like map my run helps to figure out
distance before heading to the site. Using map my run, strava or your
choice of running app means you can map what you set on the day.
It's handy to have both, you can compare to google maps and put the
final trail into google maps to share with other hares.
- You can also speak with our Trail master about your trail to get advice
and ideas.
Choosing a location
- Pagodas are a good start point and usually have good parking for
the bus, just make sure there's an area for circle that's not inside
the pagoda area as we can't drink inside.
- Circle area needs to be a bit shaded and grassy, if possible, be
aware of how it might be later in the afternoon, some overgrown
areas can be buggy in the evening.
- Note the roads going to and from start point to make sure bus can
get through, note tight corners, low overhead lines or gates and
other things that may make it challenging for the bus to get
through.
- Ask previous hares about areas they think are good but may have
not been used recently.
- You can check out previous hashes on the FB pages and talk to the
hares who set those trails. They can help you to know what is good
and what to avoid in that area, they might even help you set the
trail!
P2H3 Markings
1, 2, 3 dots for on on
Cross – go back to the check
Arrows can also be
used to show direction
Curved arrows are good
to direct around corners
or to cross over a road
Check – the regular kind,
you need to mark all the
directions, 3 dots for
correct trail, 2 dots and
cross for wrong trails
Check around, check around –
you only need to place one
mark to show direction
Hold – a stop where
all the runners wait
until last runner is
in before moving on
On on!